【Lansheng Technology Information】Texas Instruments launched a variety of new current sensors on August 23 to help engineers simplify design and improve accuracy. Designed to operate over a wide common-mode voltage and temperature range, these new products include lower-drift isolated Hall-effect current sensors for high-voltage systems and eliminate the need for external shunt resistors for non-isolated voltage rails device current shunt monitor product line.
Texas Instruments' new EZShunt™ product family includes small, fully integrated current shunt monitors and the industry's highest precision 75A integrated shunt solution for non-isolated systems up to 85V and 75ARMS.
Highly accurate current measurements are increasingly required in high-voltage systems such as electric vehicle chargers and photovoltaic inverters, but the high drift of Hall-effect current sensors over their lifetime makes them often overlooked. The Hall-effect current sensor TMCS1123 features a higher reinforced isolation operating voltage of 1,100VDC, a maximum sensitivity error of ±0.75%, a drift of 50ppm/°C over temperature, and a drift of ±0.5% over lifetime %. With the high precision of the TMCS1123, designers can optimize system performance while simplifying design. The device's high accuracy and excellent stability over its lifetime eliminates the need for recalibration of the device, reducing costly and time-consuming maintenance.
Additionally, precise control of power conversion is critical to optimize system efficiency and protection. The TMCS1123 has a low propagation delay of 600ns and a bandwidth of 250kHz, enabling faster control loops while maintaining low noise for improved system efficiency.
Texas Instruments' new EZShunt family of current-sensing solutions simplifies designs by eliminating the need for external shunt resistors. The new product family offers a fully integrated current sensing solution that fits into a 1206 shunt resistor package, delivering the value of a discrete solution in the simplicity of a single chip.
A 1Win se destaca nesse aspecto, oferecendo uma variedade de ofertas de bônus que adicionam um toque extra de empolgação à sua jornada de apostas. Neste artigo, exploraremos as melhores ofertas de bônus da 1Win e como você pode aproveitá-las ao máximo.
Bônus de Boas-Vindas: Ao entrar na 1Win, os novos jogadores são recebidos com um bônus de boas-vindas que pode ser muito gratificante. Esse bônus é geralmente concedido após o primeiro depósito realizado na plataforma. A 1Win oferece um valor adicional, muitas vezes na forma de uma porcentagem do valor depositado, dando aos jogadores um impulso financeiro inicial para suas apostas.
Reembolso em Caso de Derrota: Uma das ofertas mais interessantes é o reembolso em apostas perdidas. Com essa promoção, a 1Win devolve parte do valor apostado caso sua aposta não seja vencedora. Isso permite que os jogadores experimentem novos mercados ou até mesmo arrisquem mais, sabendo que têm uma rede de segurança em caso de derrota.
Apostas Grátis: As apostas grátis são outra característica notável na 1Win. Com esse tipo de bônus, os jogadores podem fazer apostas sem usar seu próprio dinheiro. Se a aposta resultar em um ganho, os jogadores recebem os lucros. Caso contrário, não há perda real. Isso oferece uma ótima oportunidade para explorar novos esportes e estratégias sem riscos financeiros.
Bônus de Recarga: Para manter os jogadores envolvidos, a 1Win oferece bônus de recarga. Esses bônus são aplicados quando os jogadores fazem novos depósitos em suas contas. Eles podem variar de uma porcentagem do valor depositado a um valor fixo, proporcionando um incentivo extra para continuar apostando.
Programa de Fidelidade: A 1Win valoriza seus jogadores leais e implementou um programa de fidelidade recompensador. Ao fazer apostas regulares e engajar-se ativamente na plataforma, os jogadores acumulam pontos que podem ser trocados por bônus, rodadas grátis e outras vantagens exclusivas.
É crucial entender que cada bônus tem termos e condições específicos que os jogadores devem cumprir. Antes de aproveitar qualquer oferta, é recomendável ler os detalhes para garantir que você compreenda plenamente os requisitos.
Em resumo, a 1Win https://ahoradasapostas.com/casas-de-apostas/f12-bet/ se destaca por suas emocionantes ofertas de bônus, proporcionando aos jogadores uma experiência de apostas mais envolvente. Com uma variedade de bônus disponíveis, desde boas-vindas até programas de fidelidade, os jogadores têm a oportunidade de elevar suas chances e desfrutar ao máximo das apostas esportivas online. No entanto, é essencial praticar o jogo responsável e estar ciente dos termos e condições de cada bônus.
:quality(75)/cloudfront-us-east-1.images.arcpublishing.com/elcomercio/GE3TEMBNGA3S2MBUKQYTMORRG4.jpg)
【Lansheng Technology Information】Perovskite solar energy is a promising next-generation photovoltaic technology. It has high conversion efficiency, low material cost and simple manufacturing process. It can also be made into a translucent module, but stability and life are challenges, especially for batteries. After expansion, the efficiency will drop. Today, the large-area perovskite solar module brought by Toshiba has an efficiency as high as 16.6%.
The conversion efficiency of perovskite solar energy has broken through from 3% to more than 24% in just ten years, but its high conversion efficiency is limited to a small battery of about 1 square centimeter. Once the area becomes larger, the battery efficiency will decline. However, Toshiba built The 703 cm2 polymer thin film perovskite solar module achieves a conversion efficiency of 16.6%.
Toshiba uses a modified version of ink, thin film drying technology and equipment to create a uniform perovskite layer. This technology process halves the deposition steps of methyl lead triiodide (MAPbI3) Up to 6 meters per minute, the company believes that it can meet the speed of mass production.
Toshiba has achieved 15.1% efficiency in September 2021, and this time it has increased to 16.6%, and the company previously expected to commercialize perovskite technology in 2025. Toshiba said the flexible and lightweight solar panel is suitable for places where it is difficult to install traditional silicon solar energy, such as low-load roofs and office windows.
Lansheng Technology Limited, which is a spot stock distributor of many well-known brands, we have price advantage of the first-hand spot channel, and have technical supports.
Our main brands: STMicroelectronics, Toshiba, Microchip, Vishay, Marvell, ON Semiconductor, AOS, DIODES, Murata, Samsung, Hyundai/Hynix, Xilinx, Micron, Infinone, Texas Instruments, ADI, Maxim Integrated, NXP, etc
To learn more about our products, services, and capabilities, please visit our website at http://www.lanshengic.com
【Lansheng Technology Information】Through the release of the latest Game On driver, Intel has improved the performance of Intel Ruixuan graphics card running a series of popular DX11 games-bringing an average frame rate increase of about 19% for gamers, and the average About 20% of the 99th Percentile frame rate fluency has been improved.
This update opened the prelude to the optimization of Intel Sharp DX11. The above-mentioned games are just the beginning of this optimization. Intel will continue to bring more game experience upgrades to users.
Intel will not stop here, and will continue to optimize Intel Sharp Graphics. The optimization and upgrade of DX11 this time is another proof of Intel's fulfillment of its commitment to players in terms of software optimization and game technology integration. Since the release of desktop graphics cards, Intel has released 30 driver updates, provided 57 new games with Game on optimization support, and provided many other improvements for many games. Intel's AI-powered XeSS technology is gaining momentum in gaming and is now supported by more than 70 games.
Intel also brought a tool for enthusiasts called "PresentMon", which you may have heard of before, which is a tool that Intel developed many years ago. "PresentMon" can provide support for many software for graphics performance analysis. Today, Intel released the first beta version of Intel® PresentMon, which brings an easier-to-use experience for enthusiasts through a comprehensive optimization and upgrade of the tool. In addition, new features have been added to facilitate game performance analysis for players.
The newly released driver brings an average performance improvement of about 19% for DX11 games. On the Intel Sharp A750 graphics card, the game performance of "Overwatch 2" has increased by as much as 33%. Intel also released a new tool for evaluating game performance—Intel® PresentMon. Intel Sharp has never stopped moving forward, and Intel Sharp A750 is now performing even better.
【Lansheng Technology Information】On May 10, 2023, ON Semiconductor launched the latest generation of 1200 V EliteSiC silicon carbide (SiC) M3S devices, helping power electronics engineers achieve better energy efficiency and lower system costs. New product family includes EliteSiC MOSFETs and modules that help improve switching speeds to accommodate the growing number of 800 V electric vehicle (EV) on-board chargers (OBC) and EV DC fast charging, solar solutions, energy storage and more Energy infrastructure applications.
The portfolio also includes new EliteSiC M3S devices featuring half-bridge Power Integrated Modules (PIMs) with industry-leading ultra-low Rds(on) in standard F2 packages. These modules are ideal for DC-AC, AC-DC and DC-DC high power conversion stages in industrial applications. They offer higher levels of integration with an optimized direct-bond copper design for balanced current sharing and thermal distribution between paralleled switches. These PIMs are designed to provide high power density and are suitable for energy infrastructure, DC fast charging of electric vehicles and uninterruptible power supplies (UPS).
"ON Semiconductor's latest generation of automotive and industrial EliteSiC M3S products will help designers reduce their application footprint and lower system thermal requirements," said Asif Jakwani, senior vice president and general manager of the Advanced Power Division at ON Semiconductor. This helps designers develop High-power converters with higher energy efficiency and higher power density."
Automotive-grade 1200 V EliteSiC MOSFETs are designed for high-power OBCs up to 22 kW and high-voltage to low-voltage DC-DC converters. M3S technology is specially developed for high-speed switching applications and has a switching loss figure of merit that leads similar products.
【Lansheng Technology Information】On August 9, according to the latest research report released by Ming-Chi Kuo, Qualcomm has stopped developing the Intel 20A chip.
He believes that Intel's lack of cooperation with first-line IC design companies such as Qualcomm will not be conducive to the growth of RibbonFET and PowerVia, and will further make Intel 18A R&D and mass production face higher uncertainties and risks.
Ming-Chi Kuo pointed out that after the advanced manufacturing process enters 7nm, the high-end orders of the first-line IC design industry are more important to the foundry.
According to public information, Intel plans to gradually move from Intel 10 to Intel 7 and Intel 4, and then continue to develop towards Intel 3, Intel 20A, and Intel 18A processes.
It is reported that Intel 7 has been mass-produced, Intel 4 will be launched in the second half of this year, and will be used for Core processors (Meter Lake), Intel 3 is advancing as planned, Intel 20A, Intel 18A test chips have been taped out, Intel 20A uses RibbonFET technology, which is similar to Samsung’s GAA transistor technology. In addition, Intel’s unique and industry’s first backside power transmission network will be used to optimize signal transmission by eliminating the need for power supply wiring on the front of the wafer. If all goes well If so, the Intel 20A process technology was originally planned to be mass-produced in 2024.
Although Intel announced that its CPU module will use the Intel 20A process when it announced Arrow Lake last year, there have been reports that it will switch to TSMC's N3 process. At present, it is reported that Intel has given up using the 20A process in Arrow Lake. All the chiplets above will be produced by TSMC.
【Lansheng Technology Information】According to statistics from the World Economic Forum, more than 54 million tons of waste electronic equipment are generated globally every year, and the electronic waste generated by these waste equipment is growing at a rate of 2.5 million tons per year, but only 17.4% of Collect and recycle. Circuit boards have little value after being cut, so they are often disposed of as waste, landfilled, incinerated, or piled up. This not only causes a waste of resources, but also pollutes the environment.
In order to solve this problem, Infineon, Germany's largest semiconductor manufacturer, and Jiva Materials, a British start-up company, recently launched Soluboard, a recyclable and degradable PCB substrate composed of natural fibers and halogens.
Infineon considers full-scale adoption of Soluboard in the future
"The first use of recyclable, biodegradable PCB materials in electronics design for consumer and industrial applications is a milestone towards a green future," said Andreas Kopp, Head of Product Management Discrete Devices, Green Industrial Power Division, Infineon. There is also active research into the end-of-life reusability of discrete power devices, which will be another important step in driving a circular economy in the electronics industry."
Infineon said it is using biodegradable materials to reduce the carbon footprint of demonstration and evaluation boards, and is also exploring the possibility of using the material in all circuit boards to make the electronics industry more sustainable.
Infineon has currently produced three different demonstration boards using Soluboard and plans to expand its product range in the coming years. It has already been deployed in more than 500 devices, showcasing the company's portfolio of power discretes, including a circuit board with components designed for refrigerator applications. Based on the results of ongoing stress tests, Infineon plans to provide guidance for the reuse and recycling of power semiconductors removed from the Soluboard, which can significantly extend the service life of electronic components.
【Lansheng Technology Information】Recently, ON Semiconductor announced that its profit was 576 million U.S. dollars, a year-on-year increase of 26%, and its revenue was 2.09 billion U.S. dollars. But while the company's second-quarter sales were generally underwhelming, rising about $10 million from a year earlier, the company said revenue from silicon carbide modules quadrupled in the second quarter from a year earlier.
Already one of the company's largest customer segments, the automotive industry now accounts for 90 percent of ON Semiconductor's silicon carbide sales, El-Khoury said. New customers in the second quarter included Vitesco, BorgWarner and Magna, all of which use the company's silicon carbide chips in products for electric vehicle makers.
Silicon carbide chips have become a popular choice for automakers as they strive to electrify their vehicles. At the high voltages commonly used in electric vehicles, silicon carbide is more efficient. As a result, SiC is increasingly common in traction inverters and DC-to-DC converters used in electric vehicles. According to the chipmaker, the increased efficiency could also reduce weight, reduce wear and tear on batteries and provide longer range for electric vehicles using the technology.
Silicon carbide is also used outside of the automotive field. There are also applications outside the automotive industry. These parts are also ideal for power circuits used in solar power systems, energy storage technologies, electric motors and power supplies. However, El-Khoury told analysts on a conference call that the non-automotive market only accounts for about 10% of ON Semiconductor's silicon carbide sales.
Looking ahead, ON Semiconductor is cautiously optimistic about the prospects of the semiconductor market. It is expected that the revenue in the third quarter will reach 2.0-2.19 billion US dollars, which is mainly affected by the demand for cars.
Lansheng Technology Limited, which is a spot stock distributor of many well-known brands, we have price advantage of the first-hand spot channel, and have technical supports.
Our main brands: STMicroelectronics, Toshiba, Microchip, Vishay, Marvell, ON Semiconductor, AOS, DIODES, Murata, Samsung, Hyundai/Hynix, Xilinx, Micron, Infinone, Texas Instruments, ADI, Maxim Integrated, NXP, etc
To learn more about our products, services, and capabilities, please visit our website at http://www.lanshengic.com
【Lansheng Technology Information】In an exclusive interview published by the British "Financial Times" on Wednesday, Ashwini Vaishnaw, Minister of Electronics and Information Technology of India, was not stingy with compliments, and gave a high evaluation of India's nascent semiconductor industry.
The main reason for Minister Vaishnaw's confidence is that Micron Technology of the United States announced last week that it will build a new semiconductor assembly and testing plant in India.
In this project with a total investment of up to 2.75 billion US dollars, Micron’s own investment can reach up to 825 million US dollars. The Indian government agrees to give 50% of the financial subsidies, and Gujarat provides an additional 20% of the project cost. Policy incentives.
According to the plan, Micron's Indian packaging plant will start construction next month and is expected to be officially put into operation by the end of 2024. Minister Vaishnaw emphasized that this is the (shortest) time record for all countries to set up a new industry. This is not a new company, but a whole new industry in one country. The current goal is to start output in 18 months, which is December 2024.
He also further emphasized that the "India Semiconductor Action" led by the Modi government is carrying out extensive work to win the support of other semiconductor supply chain companies, including chemical, gas, production equipment companies, etc., as well as those who are interested in setting up in India. Silicon wafer fab companies.
Lansheng Technology Limited, which is a spot stock distributor of many well-known brands, we have price advantage of the first-hand spot channel, and have technical supports.
Our main brands: STMicroelectronics, Toshiba, Microchip, Vishay, Marvell, ON Semiconductor, AOS, DIODES, Murata, Samsung, Hyundai/Hynix, Xilinx, Micron, Infinone, Texas Instruments, ADI, Maxim Integrated, NXP, etc
To learn more about our products, services, and capabilities, please visit our website at http://www.lanshengic.com
Navigating the Cart Abandonment Solution in Grocery eCommerce
In the dynamic digital realm of grocery eCommerce, cart abandonment looms as a frequent obstacle, thwarting retailers from maximizing their online sales. Customers often fill their carts only to abandon them before finalizing the purchase. This phenomenon leaves retailers in a conundrum, with potential sales left unrealized. However, cart abandonment isn't a death sentence for your sales; rather, it's a problem that can be mitigated with the right solutions.
The Plague of Cart Abandonment: A Common Challenge
Cart abandonment is a thorn in the side of grocery eCommerce retailers, preventing them from fully capitalizing on the potential of their online stores. Customers add items to their carts with great enthusiasm, but somewhere along the checkout journey, they abandon ship, leaving retailers puzzled and revenue unrealized. But fear not, for cart abandonment solutions are here to save the day.
Grocery Solutions: Tackling Cart Abandonment Head-On
To combat cart abandonment in grocery eCommerce, retailers need tailored solutions that address the unique pain points of their customers. Here are some effective strategies to implement:
Streamlined Checkout Process
Simplify the checkout process by reducing the number of steps required to complete a purchase. Minimize form fields, offer guest checkout options, and provide clear and concise instructions to keep customers engaged and motivated to complete their purchases.
Recovery Emails
Leverage the power of email marketing to re-engage customers who have abandoned their carts. Send timely and personalized recovery emails that remind customers about their abandoned items, offer incentives, and create a sense of urgency to encourage them to return and complete their purchase.
Remarketing Campaigns
Implement remarketing campaigns to reconnect with customers who have abandoned their carts. Display targeted ads across various platforms, reminding customers of their abandoned items and enticing them to return to your online store. Utilize compelling visuals and persuasive copy to reignite their interest.
Exit-Intent Pop-ups
Use exit-intent pop-ups strategically to capture the attention of customers who are about to leave your website without completing their purchase. Offer incentives, such as discounts or free shipping, to entice them to stay and convert.
Optimize Website Performance
Ensure your website loads quickly, is mobile-responsive, and provides a seamless browsing experience. A slow or clunky website can frustrate customers and lead to cart abandonment. Optimize your site's performance to keep customers engaged and motivated to complete their purchases.

By implementing these grocery solutions, you can address the root causes of cart abandonment and turn lost sales into successful conversions. Remember, the key lies in understanding your customers' pain points and providing them with a seamless and enjoyable shopping experience from start to finish.
Embrace Success: Conquer Cart Abandonment in Grocery eCommerce
Cart abandonment may seem like a formidable challenge, but with the right strategies and solutions in place, you can conquer it and unlock the full potential of your grocery eCommerce store. Don't let lost sales slip through your fingers. Embrace the power of streamlined checkouts, personalized recovery emails, remarketing campaigns, exit-intent pop-ups, and optimized website performance.
Remember, every abandoned cart is an opportunity waiting to be seized. By implementing effective cart abandonment solutions, you can recover lost revenue, foster customer loyalty, and create a shopping experience that keeps customers coming back for more.
In conclusion, cart abandonment solutions for grocery eCommerce is a common challenge in the world of grocery eCommerce. However, with the right cart abandonment solutions, you can turn the tide and unlock the full potential of your online store. Implement streamlined checkouts, recovery emails, remarketing campaigns, and exit-intent pop-ups, and optimize website performance to conquer cart abandonment and embrace success in the realm of grocery eCommerce. Seize the opportunity, captivate your customers, and watch your revenue soar.