Hardware
Raiting:
25

Top 5 Mistakes to Avoid When Installing Networking Cable


In this technology-centered era, all businesses whether big or small, require a fast, reliable and stable network connection within their headquarters. Establishing a competent network connection requires a lot of indoor and outdoor wiring, working in tight uncomfortable places and more. Often times when installing a network cable, people tend to overlook some slip-ups which could cause problems in the future. Therefore, it is essential to keep in mind that setting up a network cable requires proper planning and preparation. Before you begin it is important to check the environment your cabling will run through. Places that are exposed to a lot of heat or excessive moisture can lead to network failure and safety hazards so it is recommended that you choose a cool and dry place.

If a project is done hastily and not executed in the right manner, it could result in the business-facing hidden expenses, slower network performance and impact the overall productivity and drive of the workers.

Here are five mistakes you should be avoiding when installing a network cable:

1. Feeble cable management
Firstly, you need to ensure that you are carefully handling cables for installation and have understood the specifications for each of them. It’s important to double-check with this error so you are not scratching your head later when your cabling is faulty. This might be a time-consuming task but its benefits are never-ending and it mostly saves a lot of labour cost for maintenance.

Similarly, there needs to be room left for updates or replacing cables as and when required. When there is limited space available, it could create a hazardous environment and cause issues in replacement of older cabling. Also, you must be aware of the distance limitations on your cabling depending on the purpose. Since every cable comes with its own set of specifications, if not researched on thoroughly they can cause disturbance throughout the procedure.

Ensure that a cable is compatible to perform accurately or connections will lag and can be challenging to fix without professional help. Remember poor cable management can have a direct impact on the functional expenses of a business and if not fixed, will influence the lifespan of the servers, devices, and storage connected to it.

2. Different cables for data and voice
This is one of the most common mistakes made by businesses or homes. During the earlier days, two separate cables were installed for data and voice instead of twisted cabling, since they were considerably more expensive. However, it is filed under efficient cable management to install one twisted pair cable than two single cables.

Now, with the upsurge of VoIP in businesses and different industries, it demanded data-level cabling. VoIP tools and equipment helps you to save money on multiple cables and generally, one cable is easier to handle to avoid confusion and cluttering. It is notable that IT hardware will always continue to update and evolve but using the right cabling will provide flexibility to grow over a prolonged period of time.

3. Positioning network cables parallel to electrical cables
This can cause disturbances in the connection and quality of a signal since network cables are sensitive to electromagnetic fields. Various network cables are made up of twisted pairs where two conductors are twisted together to terminate the electromagnetic interference (EMI) from peripheral sources.

The benefit of this is that it prevents network cabling from interfering with each other but a magnetic field surrounds them generated by the minimal voltage that flows through them. During installation, one must ensure that these two are not stationed alongside as to avoid any interruptions in that magnetic field. Instead, run them perpendicular to one another, this is known to work fine in places like offices which have a lot of electrical wiring.

4. Forgetting to secure cabling during installation
Sometimes companies are in a hurry to get their network installation wrapped up. This must be avoided at all costs as it puts the specialists under pressure and often leads to misplacements, unsecure cabling and more. Granted it takes time to make sure that there is no cluttering and unorganized cabling, it is crucial as ignorance on such matters can cause changes in the external nature of the cables and disrupt their efficiency.

5. Compromising with the Quality/Version
Majority of businesses require technology and network connection since it helps them in several aspects of their daily tasks and results. Therefore, to compromise on the quality of your cabling can cause you to suffer major consequences in the future. With the growing progressions of technology, it is important to observe the quality and specifications of the cables you are investing in. The smarter move is to opt for worthy Ethernet cables that are able to enable strong connections within your workplace.

While you might not require lightning speed at the moment, it is suitable to go for a reliable choice that can cater to your firm’s needs. Cat6 rj45 is a stellar choice that offers speed up to 10 Gbps, provides minimum crosstalk and protection from tempering.

Moreover, not following proper rules and regulations while undergoing network installations has known to cause accidents. For instance, the use of PVC-jacketed cabling is banned in most places due to the toxic smell produced when it burns. When inhaled by any being, it can be harmful, lead to severe health issues and if the authorities find out, can result in hefty fines.
Mishaps can happen anytime but it is always preferred to be aware of such mistakes beforehand so you can prevent them from occurring. The best way to go about network cabling is to invest in good quality cables, equipment, and proficient network installation experts to avoid any regrets in the future. It is always a great idea to test the network and cabling once the installation is complete to check the speed transmission and signal strength.

Keeping the above points in mind, you’ll be able to ensure that everything runs smoothly and enjoy a successful network connection. All the best!
iarslan 17 september 2019, 7:42
Vote for this post
Bring it to the Main Page
 

Comments

Leave a Reply

B
I
U
S
Help
Avaible tags
  • <b>...</b>highlighting important text on the page in bold
  • <i>..</i>highlighting important text on the page in italic
  • <u>...</u>allocated with tag <u> text shownas underlined
  • <s>...</s>allocated with tag <s> text shown as strikethrough
  • <sup>...</sup>, <sub>...</sub>text in the tag <sup> appears as a superscript, <sub> - subscript
  • <blockquote>...</blockquote>For  highlight citation, use the tag <blockquote>
  • <code lang="lang">...</code>highlighting the program code (supported by bash, cpp, cs, css, xml, html, java, javascript, lisp, lua, php, perl, python, ruby, sql, scala, text)
  • <a href="http://...">...</a>link, specify the desired Internet address in the href attribute
  • <img src="http://..." alt="text" />specify the full path of image in the src attribute